Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 66980

Optimizing routines for heat treatment of metals using numerical simulation based on infrared thermographic measurement


Šundov, Igor
Optimizing routines for heat treatment of metals using numerical simulation based on infrared thermographic measurement // 5th Quantitative Infrared Thermography QIRT 2000 (Book of Abstracts)
Lodz: Akademickie Centrum Graficzno-Marketingowe Lodart S.A., 2000. str. 182-184 (predavanje, međunarodna recenzija, sažetak, znanstveni)


Naslov
Optimizing routines for heat treatment of metals using numerical simulation based on infrared thermographic measurement

Autori
Šundov, Igor

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
5th Quantitative Infrared Thermography QIRT 2000 (Book of Abstracts) / - Lodz : Akademickie Centrum Graficzno-Marketingowe Lodart S.A., 2000, 182-184

Skup
5th Quantitative Infrared Thermography QIRT 2000

Mjesto i datum
Reims, Francuska, 18.-21. 07. 2000

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
mjerenja; termografija; numeričke metode; simulacija
(measurements; thermography; numerical methods; simulation)

Sažetak
The analysis of complex probe geometry heating and cooling was done aiming to find the temperature distribution inside the probe versus time. An infrared thermography was used to measure surface temperatures while temperatures inside the probe were measured with thermocouples. The results obtained by means of the numerical model based on the control volume approach, where thermographic measurements were the input parameters, show good mutual accordance with the ones obtained by thermocouple measurement at referent points of the probe. The local and average heat transfer coefficients have also been calculated by means of a numerical model. Based on that data, it is possible to find the influence of heat transfer level on heating or cooling processes. The simulation of applied therodynamics problems, especially in heat treatment of metals, provides a possibility to predict and monitor temperature change for each single point inside the probe in a way which will guarantee that the desired microstructure is obtained. The goal of the project was to find a possibility to simulate similar processes without providing measurements for all possible setups of the furnace parameters, which will reduces costs and time.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
120021

Ustanove
Fakultet strojarstva i brodogradnje, Zagreb

Profili:

Avatar Url Igor Šundov (autor)

Citiraj ovu publikaciju

Šundov, Igor
Optimizing routines for heat treatment of metals using numerical simulation based on infrared thermographic measurement // 5th Quantitative Infrared Thermography QIRT 2000 (Book of Abstracts)
Lodz: Akademickie Centrum Graficzno-Marketingowe Lodart S.A., 2000. str. 182-184 (predavanje, međunarodna recenzija, sažetak, znanstveni)
Šundov, I. (2000) Optimizing routines for heat treatment of metals using numerical simulation based on infrared thermographic measurement. U: 5th Quantitative Infrared Thermography QIRT 2000 (Book of Abstracts).
@article{article, author = {\v{S}undov, I.}, year = {2000}, pages = {182-184}, keywords = {measurements, thermography, numerical methods, simulation}, title = {Optimizing routines for heat treatment of metals using numerical simulation based on infrared thermographic measurement}, keyword = {measurements, thermography, numerical methods, simulation}, publisher = {Akademickie Centrum Graficzno-Marketingowe Lodart S.A.}, publisherplace = {Reims, Francuska} }