The Possibility for Environmental Friendly Recycling of Printed Circuit Boards (CROSBI ID 603071)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Premur, Vitomir ; Anić Vučinić, Aleksandra ; Vujević, Dinko ; Bedeković, Gordan
engleski
The Possibility for Environmental Friendly Recycling of Printed Circuit Boards
The goal of this work was to find a treatment solution for vitroplast FR4, a material found in waste printed circuit boards. So, within this study the influence of addition of residual 2/0.04 mm class vitroplast generated by mechanical treatment of waste printed circuit boards on concrete properties such as compressive strength were investigated in laboratory conditions. By substitution of filer i.e. sand (F1, F2) in ratio of 5, 10, 15 and 20% with vitroplast in concrete mixture compressive strength decreased for 57.5, 84.5, 95.0 and 95.9%. The results of leaching test has shown that by incorporating of vitroplast in concrete mixture in 10% ratio, beside others, decrease elution of arsenic and cadmium almost completely and regarding mercury for 70% which is below the limitations prescribed for the inert waste. The studied approach offers the possibility for environmental friendly recycling of printed circuit boards.
Printed Circuit Boards; Recycling; Vitroplast FR4; Concrete Production; Waste Management
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
367-367.
2013.
objavljeno
Podaci o matičnoj publikaciji
Ban, M.
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu
Podaci o skupu
8th Conference on Sustainable Development of Energy, Water and Environmental Systems
predavanje
22.09.2013-27.09.2013
Dubrovnik, Hrvatska