Investigation of the influence of the level of carbon And nitrogen potential at high temperature Carbonitriding of mn-cr steel (CROSBI ID 602442)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Rosandić, Željko ; Anđelković, Dejan ; Opačak, Ivan ; Marušić, Vlatko
engleski
Investigation of the influence of the level of carbon And nitrogen potential at high temperature Carbonitriding of mn-cr steel
High temperature carbonitriding is a process of heat treatment that is used to increase the surface hardness of components, in order to reduce wear. The worm press for production of vegetable oil was chosen as an example of a system in which the high temperature carbonitrided components, made of Mn- Cr steel, are also built in. In exploitation, the extraction cage knife is exposed to a significant influence of the abrasive media, and the fatigue of material. A decrease of installed capacity efficiency is the result of local damages of components due to wear. The determined dimensional criterion of seizure makes the process of high temperature carbonitriding very suitable for the production of components that are used in the given exploitation conditions. The possibility of changing the level of carbon and nitrogen potential, as well as the effect on the possible life of extraction cage knives, were analysed. The use of a different carbon and nitrogen potential at the high temperature carbonitriding of test samples results in an extremely favourable flow of hardness at the crosssection. It can be observed that the achieved course of hardness is an extremely important indicator that had a significant impact on the final decision on the suitability of the observed process of thermochemical treatment for the intended purpose.
carbonitrided components; high temperature; worm press
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
115-120.
2013.
objavljeno
Podaci o matičnoj publikaciji
III International Conference Industrial Engineering and Environmental Protection (IIZS 2013) Proceedings
Desnica, Eleonora ; Radovanović, Ljiljana ; Jasmina
Zrenjanin: Tehnički fakultet Mihajlo Pupin Zrenjanin Univerziteta u Novom Sadu
978-86-7672-208-2
Podaci o skupu
III International Conference Industrial Engineering and Environmental Protection
predavanje
30.10.2013-30.10.2013
Zrenjanin, Srbija