Control-Oriented Modeling and Experimental Identification of an Ultracapacitor Module (CROSBI ID 600535)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Pavković, Danijel ; Hrgetić, Mario ; Komljenović Ante
engleski
Control-Oriented Modeling and Experimental Identification of an Ultracapacitor Module
This paper presents the results of experimental identification of control-oriented lumped-parameter model of an ultracapacitor module suitable for energy management and state-of-charge (SoC) estimation applications. For the purpose of identification a custom-built test setup comprising current-controlled DC/DC converter has been utilized. The ultracapacitor capacitance vs. voltage curve identification is based on the constant-current charging/discharging tests, while the identification of the overall ultracapacitor admittance model (comprising capacitance and internal resistance effects) is based on ARX process model representation. Thus obtained ultracapacitor model parameters are then used to build control-oriented ultracapacitor simulation models, which are validated against the experimentally-recorded data.
Ultracapacitors; modeling; identification; DC/DC converter; current control; simulation
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
254-259.
2013.
objavljeno
Podaci o matičnoj publikaciji
17th International Conference on Electrical Drives and Power Electronics, EDPE 2013 (CD Proceedings)
Kolonić, Fetah ; Matuško, Jadranko
Zagreb: Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA)
978-953-56937-8-9
1339-3944
Podaci o skupu
17th International Conference on Electrical Drives and Power Electronics – EDPE 2013
poster
02.10.2013-04.10.2013
Dubrovnik, Hrvatska