Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 641111

Modeling of unavoidable residual stresses after transformation-free cooling


Landek, Darko; Lisjak, Dragutin; Lübben, Thomas; Frerichs, Friedhelm
Modeling of unavoidable residual stresses after transformation-free cooling // The proceedings of 2nd mediterranean conference & new challenges on heat treatment and surface engineering / Smoljan, Božo ; Matijević, Božidar (ur.).
Zagreb: CSHTSE, 2013. str. 367-374 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 641111 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Modeling of unavoidable residual stresses after transformation-free cooling

Autori
Landek, Darko ; Lisjak, Dragutin ; Lübben, Thomas ; Frerichs, Friedhelm

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
The proceedings of 2nd mediterranean conference & new challenges on heat treatment and surface engineering / Smoljan, Božo ; Matijević, Božidar - Zagreb : CSHTSE, 2013, 367-374

ISBN
978-953-7690-02-01

Skup
The 2nd mediterranean conference & new challenges on heat treatment and surface engineering

Mjesto i datum
Dubrovnik- Cavtat, Hrvatska, 11-14.06.2013

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
thermal strains; residual stresses; dimensionless numbers; austenitic steel

Sažetak
Predicting thermal distortions and residual thermal stresses after steel heat treatment from computer simulations is a complex task that involves use a number of process parameters and nonlinear variation of steel properties. Previous studies cooling cylinders without the occurrence of phase transformations in the microstructure indicated the possibility of introducing the dimensionless numbers to predict changes in their dimensions. It was found that the changes in the dimensions of cylinders statistically correlate well with only a few dimensionless numbers that include: shape and dimensions of component, its initial temperature, temperature of the quenching media, heat transfer coefficient, heat conductivity, heat capacity, density, thermal expansion coefficient, Young´s modulus, Poisson´s ratio, yield strength and strain hardening behaviour. The next step in researches is carried out through on a set of numerical simulations with aim to predict the changes of residual stresses of austenitic stainless steels after cooling from the high temperature down to the room temperature. The proposed nonlinear regression model predicts equivalent residual stresses in vicinity of the surface in the half length of long cylinders from a set of autonomous dimensionless numbers.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekti:
120-1201780-1779 - Modeliranje svojstava materijala i parametara procesa (Filetin, Tomislav, MZOS ) ( POIROT)
120-1201833-1791 - Inženjerstvo površina u proizvodnji konstrukcijskih dijelova i alata (Cajner, Franjo, MZOS ) ( POIROT)

Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb

Profili:

Avatar Url Dragutin Lisjak (autor)

Avatar Url Darko Landek (autor)


Citiraj ovu publikaciju:

Landek, Darko; Lisjak, Dragutin; Lübben, Thomas; Frerichs, Friedhelm
Modeling of unavoidable residual stresses after transformation-free cooling // The proceedings of 2nd mediterranean conference & new challenges on heat treatment and surface engineering / Smoljan, Božo ; Matijević, Božidar (ur.).
Zagreb: CSHTSE, 2013. str. 367-374 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Landek, D., Lisjak, D., Lübben, T. & Frerichs, F. (2013) Modeling of unavoidable residual stresses after transformation-free cooling. U: Smoljan, B. & Matijević, B. (ur.)The proceedings of 2nd mediterranean conference & new challenges on heat treatment and surface engineering.
@article{article, year = {2013}, pages = {367-374}, keywords = {thermal strains, residual stresses, dimensionless numbers, austenitic steel}, isbn = {978-953-7690-02-01}, title = {Modeling of unavoidable residual stresses after transformation-free cooling}, keyword = {thermal strains, residual stresses, dimensionless numbers, austenitic steel}, publisher = {CSHTSE}, publisherplace = {Dubrovnik- Cavtat, Hrvatska} }
@article{article, year = {2013}, pages = {367-374}, keywords = {thermal strains, residual stresses, dimensionless numbers, austenitic steel}, isbn = {978-953-7690-02-01}, title = {Modeling of unavoidable residual stresses after transformation-free cooling}, keyword = {thermal strains, residual stresses, dimensionless numbers, austenitic steel}, publisher = {CSHTSE}, publisherplace = {Dubrovnik- Cavtat, Hrvatska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font