AFM characterisation of sol-gel TiO2 films deposited on stainless steel (CROSBI ID 194499)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Ćurković, Lidija ; Salopek, Sara ; Šegota, Suzana ; Majić Renjo, Marijana ; Tomić, Tanja
engleski
AFM characterisation of sol-gel TiO2 films deposited on stainless steel
One-layer, two-layer and three-layer titania films on AISI 304 stainless steel were deposited by sol-gel process and dip-coating method. Two sols were prepared by using titanium isopropoxide as a precursor, propanol as a solvent, nitric acid as a catalyst and acetylacetone for peptization. Both of the prepared sols contained the same amount of mentioned components, the only difference was in the addition of polyethylene glycol (PEG) as templating reagent to one of the sols. After calcination at 550°C, deposited films on the stainless steel substrate were characterized by atomic force microscope (AFM). Influence of layer number as well as addition of polyethylene glycol on morphology of titania films was analysed and discussed. Generally, by increasing the number of layers and by addition of polyethylene glycol, roughness parameters increase by changing surface topography. The surface topography analysis is very important when choosing the adequate industrial application of prepared layers.
sol-gel; TiO2; films; AFM
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
44 (7)
2013.
650-654
objavljeno
0933-5137
10.1002/mawe.201300065
Povezanost rada
Kemija, Strojarstvo, Temeljne tehničke znanosti