Colouring of polymer products manufacturing by selective laser sintering (CROSBI ID 598198)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Videc, Danijel ; Šercer, Mladen ; Pilipović, Ana
engleski
Colouring of polymer products manufacturing by selective laser sintering
With additive manufacturing it is possible to create products with complicated geometry from 3D data in very short time, which is very difficult or even impossible to do with other manufacturing technologies. However, there are many limitations, primarily in the selection of plastic materials and available colours. Also the problem occurs for different additive processes in the appearance of the final surface.Thus, the process selective laser sintering – SLS uses plastic powder that gives a high surface roughness and products can be made only in one colour – white. The paper will provide a brief overview of SLS, processes of colouring and different surface treatment of polyamide products made by SLS after surface treatment and without it.
Colouring; roughness; selective laser sintering
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
237-244.
2013.
objavljeno
Podaci o matičnoj publikaciji
CIM 2013 : Computer integrated manufacturing and high speed machining
Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)
978-953-7689-02-5
Podaci o skupu
14th International Scientific Conference on Production Engineering
predavanje
19.06.2013-22.06.2013
Biograd na Moru, Hrvatska