Napredna pretraga

Pregled bibliografske jedinice broj: 633039

Comparison of Material Properties and Creep Behavior of 20MnCr5 and S275JR Steels


Brnić, Josip; Niu, Jitai; Turkalj, Goran; Čanađija, Marko; Lanc, Domagoj; Brčić, Marino; Kršćanski, Sanjin; Vukelić, Goran
Comparison of Material Properties and Creep Behavior of 20MnCr5 and S275JR Steels // Materials Science Forum, 762 (2013), 47-54 doi:10.4028/www.scientific.net/MSF.762.47 (podatak o recenziji nije dostupan, članak, znanstveni)


Naslov
Comparison of Material Properties and Creep Behavior of 20MnCr5 and S275JR Steels

Autori
Brnić, Josip ; Niu, Jitai ; Turkalj, Goran ; Čanađija, Marko ; Lanc, Domagoj ; Brčić, Marino ; Kršćanski, Sanjin ; Vukelić, Goran

Izvornik
Materials Science Forum (1662-9752) 762 (2013); 47-54

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
20MnCr5 steel; S275JR steel; Mechanical properties; Creep; Charpy impact energy

Sažetak
It is well known that the optimization procedure has an important role in the structure design. Furthermore, experimentally obtained data of material behavior is known to serve as the most relevant data in the mentioned design procedure. Therefore, this paper sets out to examine some experimentally determined data of the material subjected to certain environmental conditions. Based on these parameters, some analyses of material behavior can be made. In addition, data are of such nature that it is possible to make an appropriate comparison between the two investigated materials. Materials under considerations were 20MnCr5 steel and S275JR steel. Both of materials have been subjected to the same environmental conditions and the following properties can be singled out: ultimate tensile strength, 0.2 offset yield strength, the modulus of elasticity, elongation, creep behavior and Charpy impact energy. Each of the mentioned details are determined by the corresponding test, e.g. data related to strengths and to creep behavior are determined by tensile tests while impact energy is determined by Charpy impact test. In this way, the obtained values are presented in the form of the engineering stress-strain diagrams, creep curves and impact energy data.

Izvorni jezik
Engleski

Znanstvena područja
Brodogradnja, Strojarstvo, Temeljne tehničke znanosti



POVEZANOST RADA


Projekt / tema
069-0691736-1737 - Numerička analiza odziva konstrukcija za određena područja eksploatacije (Josip Brnić, )

Ustanove
Tehnički fakultet, Rijeka

Uključenost u ostale bibliografske baze podataka:


  • CA Search (Chemical Abstracts)
  • Compendex (EI Village)
  • SCOPUS
  • Cambridge Scientific Abstracts
  • Chemical Abstract
  • Institutions of Electrical Engineers


Citati