Composite joint of timber truss girders (CROSBI ID 597017)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Rajčić, Vlatka ; Pavković, Krunoslav ;
engleski
Composite joint of timber truss girders
In this paper the possibility of joining elements of timber truss girder with "built-in" connection will be explored. The joint will be based on glued-in steel rod, glass and/or carbon fiber-reinforced timber element and built-in steel tube which takes the tensile force. Fibre-reinforce textile will be implemented locally between the timber layers, in adhesion layer. Glue laminated timber elements will be laminated horizontally as opposed to the usual used vertical lamination. The study of this joint will be conducted experimentally and numerically. Experimental testing will be conducted on a somewhat smaller number of specimens with applied load at angle 0°, 45° and 90° to the grain and on the prototype of truss girder. Fields not explored by experimental laboratory testing , will be explored by examining the complex numerical models.
composite joints; timber truss girder
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
20-23.
2012.
objavljeno
Podaci o matičnoj publikaciji
Enhance mechanical properties of timber, engineered wood products and timber structures
Kay-Uwe Schober
Bath: University of Bath
978-1-85790-176-2
Podaci o skupu
COST Action 1004 - Early Stage Researcher Conference Enhance mechanical properties of timber, engineered wood products and timber structures
predavanje
19.06.2012-20.06.2012
Zagreb, Hrvatska