Drill-In Fluids Design Criteria (CROSBI ID 479093)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Gaurina-Međimurec, Nediljka ; Simon, Katarina ; Matanović, Davorin
engleski
Drill-In Fluids Design Criteria
Drill-in fluids become more widespread in their use recently primarily due to the increase of horizontal and multi-lateral drilling, the increase in open hole completions, and the potential for much greater production. The use of fluids that cause minimal formation damage can result in dramatically improved production, because most reservoirs are sensitive to any fluids other than those contained in them naturally. A variety of fluids can be used as drill-in fluids, including water-, oil- and synthetic-base fluids. The selection of the most appropriate drill-in fluid depends not only on potential formation damage mechanisms, but also on the type of formation to be drilled and the completion method to be used. Temperature, density and known drilling problems also must be considered. Design criteria and available drill-in fluids used world-wide, are presented in this paper.
horizontal wells; drilling; fluid selection
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
42-46-x.
1999.
objavljeno
Podaci o matičnoj publikaciji
Working materials of 2nd International Symposium on Petroleum Geology
-
Zagreb: -
Podaci o skupu
2nd International Symposium on Petroleum Geology "Probability Approach to Petroleum Exploration"
poster
22.04.1999-24.04.1999
Zagreb, Hrvatska