Tooth Root Stress Modifying Factors of Webbed Gear (CROSBI ID 594936)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Marunić, Gordana
engleski
Tooth Root Stress Modifying Factors of Webbed Gear
The effect of spur gear structure upon tooth root stress has been analysed to establish basic design recommendations for gear with middle and offset web. To bring into line with the proposal of standard ISO, method B for tooth root stress calculation where the rim thickness factor is used for nominal stress correction of thin-rimmed gear, the ratio of tooth root stress for thin-rimmed and a solid gear, has been established based upon 3D FEM calculations. Unlike for the case of standard ISO tooth root stress calculation, the obtained stresses have allowed the insight into the effect of actual gear structure on the tooth root stress, they have pointed to the differences between analytical 2D ISO and 3D FEM approach, and have aimed the possibilities for tooth root stress minimisation.
gear structure; tooth root stress; 3D FEM; standard ISO
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
197-200.
2011.
objavljeno
Podaci o matičnoj publikaciji
Machines, Technologies , Materials 2011 Proceedings
Varna:
Podaci o skupu
VIII International Congress Machines, Technologies , Materials 2011
predavanje
19.09.2011-21.09.2011
Varna, Bugarska