Napredna pretraga

Pregled bibliografske jedinice broj: 604002

INFLUENCE OF UV EXPOSURE ON THE SURFACE AND MECHANICAL PROPERTIES OF FLEXOGRAPHIC PRINTING PLATE


Mahović Poljaček, Sanja; Tomašegović, Tamara; Gojo Miroslav
INFLUENCE OF UV EXPOSURE ON THE SURFACE AND MECHANICAL PROPERTIES OF FLEXOGRAPHIC PRINTING PLATE // GRID 2012 Proceedings / Novaković, Dragoljub (ur.).
Novi Sad: Faculty of Technical Science, Department of Graphic Engineering and Design, 2012. str. 135-140 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
INFLUENCE OF UV EXPOSURE ON THE SURFACE AND MECHANICAL PROPERTIES OF FLEXOGRAPHIC PRINTING PLATE

Autori
Mahović Poljaček, Sanja ; Tomašegović, Tamara ; Gojo Miroslav

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
GRID 2012 Proceedings / Novaković, Dragoljub - Novi Sad : Faculty of Technical Science, Department of Graphic Engineering and Design, 2012, 135-140

ISBN
978-86-7892-457-6

Skup
6th International Symposium on Graphic Engineering and Design

Mjesto i datum
Novi Sad, Serbia, 15-16. 11. 2012

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Flexography; photopolymer; UV radiation; hardness; contact angle; surface energy

Sažetak
Flexographic printing plates are widely used in packaging printing and are therefore a subject of number of studies. Since the properties of the flexographic printing plate significantly influence properties of the final product, the impact of different plate processing conditions were investigated in this paper. Samples of flexographic printing plate used in this research were made form liquid photopolymer, and the influence of main exposure (UV radiation) on mechanical and physicalchemical properties was studied. Contact angle, surface energy and hardness changes were measured. Information about changes that occur on the surface and in the volume of a flexographic printing plate as a result of different processing conditions was provided. Results obtained in this paper are relevant for the flexographic reproduction process for two reasons: they point to the absorption of the printing ink and they define possible deformations that occur due to the pressure in printing process.

Izvorni jezik
Engleski

Znanstvena područja
Grafička tehnologija



POVEZANOST RADA


Projekt / tema
128-1201785-2228 - Razvoj metoda mjerenja površina tiskovnih formi (Miroslav Gojo, )

Ustanove
Grafički fakultet, Zagreb