Calculation of Asynchronous Traction Motor Start-Up Characteristics by FEM Method (CROSBI ID 591432)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Tvorić, Stjepan ; Tomičić, Branko ; Car, Stjepan
engleski
Calculation of Asynchronous Traction Motor Start-Up Characteristics by FEM Method
2D and 3D calculation of squirrel-cage traction motor start-up characteristics at rated voltage and frequency have been performed by using a numerical FEM based program. From the equivalent circuit parameters, which are obtained by analytical calculation, a simulation of a start-up using an analytical dynamic model was performed. The calculated start-up characteristics of the induction motor have been compared with the measurement results. On the basis of the obtained results, an analysis of rotor skew effect, skin effect and the saturation on the accuracy of the presented calculations have been undertaken.
induction traction motor; FEM; motor startup;
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
1-5.
2012.
objavljeno
Podaci o matičnoj publikaciji
International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2012) : proceedings
Piscataway (NJ): Institute of Electrical and Electronics Engineers (IEEE)
978-1-4673-1300-1
Podaci o skupu
International Symposium on Power Electronics, Electrical Drives, Automation and Motion
predavanje
20.06.2012-22.06.2012
Sorrento, Italija