Napredna pretraga

Pregled bibliografske jedinice broj: 597533

Introduction of New Surface Treatment Technologies Into Practice - Zinc Based Composite Coating with PTFE Particles (Zn-PTFE Coating)


Drasnar, Petr: Kudláček, Jan; Roskanin, Petr; Pepelnjak, Tomaž; Car, Zlatan; Vales, M.
Introduction of New Surface Treatment Technologies Into Practice - Zinc Based Composite Coating with PTFE Particles (Zn-PTFE Coating) // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2012. str. 339-342 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Introduction of New Surface Treatment Technologies Into Practice - Zinc Based Composite Coating with PTFE Particles (Zn-PTFE Coating)

Autori
Drasnar, Petr: Kudláček, Jan ; Roskanin, Petr ; Pepelnjak, Tomaž ; Car, Zlatan ; Vales, M.

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; - Rijeka : Faculty of Engineering University of Rijeka, 2012, 339-342

ISBN
978-953-6326-77-8

Skup
International Conference on Innovative Technologies IN-TECH

Mjesto i datum
Rijeka, Hrvatska, 26-29.09.2012

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Electroplating; composite coating; technological process; galvanizing line; Zn-PTFE

Sažetak
Paper deals with the description of the implementation of innovative Zn-PTFE coating into industrial production. Zn-PTFE composite coating is presumed to be used primarily on (high-strength) bolts. This coating offers excellent anticorrosive properties together with low friction coefficient. The article summarizes the technological production process of coating which was optimized to ensure homogeneous distribution of PTFE (polytetraflouethylene) particles in the coating and also to achieve optimal tribological parameters. The article mainly aims to present the structure of the industrial plating line and the general description of the technical conditions that need to be resolved in order to ensure this electroplating process to function properly.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija, Računarstvo, Strojarstvo



POVEZANOST RADA


Projekt / tema
069-1201787-1754 - Numeričko modeliranje, simulacija i optimizacija u oblikovanju lima (Zlatan Car, )

Ustanove
Tehnički fakultet, Rijeka

Autor s matičnim brojem:
Zlatan Car, (259465)