Napredna pretraga

Pregled bibliografske jedinice broj: 597528

BI-Metallic Cold Backward Extrusion – Numerical Simulation with Experimental Verification


Plančak, Miroslav; Movrin, Dejan; Car, Zlatan; Dragiša Vilotić; Kacmarcik, Igor; Kršulja, Marko
BI-Metallic Cold Backward Extrusion – Numerical Simulation with Experimental Verification // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Faculty of Engineering University of Rijeka, 2012. str. 417-420 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
BI-Metallic Cold Backward Extrusion – Numerical Simulation with Experimental Verification

Autori
Plančak, Miroslav ; Movrin, Dejan ; Car, Zlatan ; Dragiša Vilotić ; Kacmarcik, Igor ; Kršulja, Marko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; - Rijeka : Faculty of Engineering University of Rijeka, 2012, 417-420

ISBN
978-953-6326-77-8

Skup
International Conference on Innovative Technologies IN-TECH

Mjesto i datum
Rijeka, Hrvatska, 26-29.09.2012

Vrsta sudjelovanja
Pozvano predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Bi-metallic extrusion; numerical simulation; experiment

Sažetak
Bi-metallic extrusion is a metal forming operation where billet is composed of two different metallic materials which are then concurrently extruded into a final workpiece. In this way final component, consisting of two different materials which are metallurgically bonded, is created. Extrusion of bi-metallic workpieces differs in many aspects from the classical single-metal extrusion. Although bi-metallic extrusion enables beneficial utilization of favourable characteristics of both paired materials, this process has not been often applied in the industrial practice so far. This is mainly due to the certain dearth of knowledge and experience in this field. The present study is bound to the backward extrusion of bi-metallic materials. Combination of Al-Cu as a billet composition is explored numerically and experimentally. Material flow as well as mechanical properties of the obtained bi-metallic component have been determined and analysed.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija, Računarstvo, Strojarstvo



POVEZANOST RADA


Projekt / tema
069-1201787-1754 - Numeričko modeliranje, simulacija i optimizacija u oblikovanju lima (Zlatan Car, )

Ustanove
Tehnički fakultet, Rijeka