Napredna pretraga

Pregled bibliografske jedinice broj: 597101

Application of Modelling and Optimization Methods in Abrasive Water Jet Machining


Jurkovic, Zoran; Perinic, Mladen; Maricic, Sven; Sekulic, Milenko; Mandic, Vesna
Application of Modelling and Optimization Methods in Abrasive Water Jet Machining // 16th International Research/Expert Conference / Ekinović, S., Yalcin, S., Calvet, J. V. (ur.).
Zenica-Barcelona-Istanbul: Faculty of Mechanical Engineering, Escola Tecnica Superior D'Enginyeria Industrial de Barcelona, Bahçeşehir University Istanbul, 2012. str. 645-648 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Application of Modelling and Optimization Methods in Abrasive Water Jet Machining

Autori
Jurkovic, Zoran ; Perinic, Mladen ; Maricic, Sven ; Sekulic, Milenko ; Mandic, Vesna

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
16th International Research/Expert Conference / Ekinović, S., Yalcin, S., Calvet, J. V. - Zenica-Barcelona-Istanbul : Faculty of Mechanical Engineering, Escola Tecnica Superior D'Enginyeria Industrial de Barcelona, Bahçeşehir University Istanbul, 2012, 645-648

Skup
Trends in the Development of Machinery and Associated Technology - TMT 2012

Mjesto i datum
Dubai, Ujedinjeni Arapski Emirati, 10-12.09.2012.

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Abrasive water jet machining; surface roughness; modelling; optimizatio

Sažetak
Abrasive water jet machining belongs to the non-conventional machining processes. Abrasive water jet machining as a tool used by water jet under high pressure with the addition of abrasive particles and represent of highly dynamic and stochastic machining process. The aim of this paper is to conduct the experimental research of process parameters influence on surface roughness of the machined parts, and to study the effects of selected process parameters on the surface roughness. The research was carried out for two different materials (stainless steel and aluminium alloy) using orthogonal experiment plan and factorial design. Based on the obtained experimental results are defined mathematical models of surface roughness using different approaches. The optimal values of process parameters, verified through confirmation tests, improve cutting quality.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Ustanove
Tehnički fakultet, Rijeka