RHEOLOGICAL PROPERTIES IN PROCESSING AND MORPHOLOGICAL STRUCTURE OF COMPATIBILIZED PP/HDPE BLENDS (CROSBI ID 589580)
Prilog sa skupa u zborniku | sažetak izlaganja sa skupa | međunarodna recenzija
Podaci o odgovornosti
Vranješ Penava, Nina ; Rek, Vesna ; Jelčić, Želimir ; Šlouf, Miroslav
engleski
RHEOLOGICAL PROPERTIES IN PROCESSING AND MORPHOLOGICAL STRUCTURE OF COMPATIBILIZED PP/HDPE BLENDS
Polypropylene (PP), high density polyethylene (HDPE) and their blends with and without ethylene-propylene–diene terpolymer (EPDM) as compatibilizer were prepared. Two different amounts (5 and 7 phr) of EPDM were added to PP/HDPE blends. Rheological properties in processing were followed during preparation of samples in twin screw extruder. Extrusion capacity (Q), torque (TQ) and back-pressure (p) were recorded and apparent viscosity was approximated by TQ/Q and p/Q ratios. Morphological structure was determined by scanning electron microscope (SEM). Ultrathin sections of the samples were also observed by scanning transmission electron microscopy (STEM).
Rheological properties in processing; Morphological structure; Scanning electron microscope; PP/HDPE blends
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
101-101.
2012.
objavljeno
Podaci o matičnoj publikaciji
7th MoDeSt Conference, programme book
-
Prag: Institute of Macromolecular Chemistry AS CR, v.v.i.
978-80-85009-74-3
Podaci o skupu
7th MoDeSt Conference
poster
02.09.2012-06.09.2012
Prag, Češka Republika