Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Modeling, design and control of a flexible rotor supported by active magnetic bearings (CROSBI ID 589366)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Štimac, Goranka ; Braut, Sanjin ; Žigulić, Roberto ; Skoblar, Ante ; Modeling, design and control of a flexible rotor supported by active magnetic bearings // Proceedings of the 10th International Conference on Vibrations in Rotating Machinery. London : Delhi: IMechE, London, 2012. str. 419-426

Podaci o odgovornosti

Štimac, Goranka ; Braut, Sanjin ; Žigulić, Roberto ; Skoblar, Ante ;

engleski

Modeling, design and control of a flexible rotor supported by active magnetic bearings

In this paper an approach to analyze and stabilize a decentralized rotor/AMB system while passing the first critical speed is presented. Since the related difficulties emerge from the sensor/actuator non-collocation a set of finite element calculations and relevant rotordynamic studies are proposed and carried out. In such a way the adequate mechanical configuration of the system is found and proper controllability and observability is ensured. In accordance with the simulation results, the test rig is assembled. Finally, successful run up and run down analyses were carried out, which validated the efficiency of the presented procedure.

aktivni magnetski ležaj; design; noncollocation; rotordynamic analysis

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

419-426.

2012.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the 10th International Conference on Vibrations in Rotating Machinery

London : Delhi: IMechE, London

Podaci o skupu

10th International Conference on Vibrations in Rotating Machinery

predavanje

11.09.2012-13.09.2012

London, Ujedinjeno Kraljevstvo

Povezanost rada

Strojarstvo, Temeljne tehničke znanosti