Napredna pretraga

Pregled bibliografske jedinice broj: 588433

Leak-Before-Break Analysis of a Pressurizer - Estimation of the Elastic-Plastic Semi-elliptical Through Wall Crack Opening Displacement


Gubeljak, Nenad; Predan, Jožef; Kozak, Dražan
Leak-Before-Break Analysis of a Pressurizer - Estimation of the Elastic-Plastic Semi-elliptical Through Wall Crack Opening Displacement // Structural Integrity and Life, 12 (2012), 1; 31-34 (podatak o recenziji nije dostupan, članak, znanstveni)


Naslov
Leak-Before-Break Analysis of a Pressurizer - Estimation of the Elastic-Plastic Semi-elliptical Through Wall Crack Opening Displacement

Autori
Gubeljak, Nenad ; Predan, Jožef ; Kozak, Dražan

Izvornik
Structural Integrity and Life (1451-3749) 12 (2012), 1; 31-34

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Semi-elliptical through-wall crack; crack opening displacement; GE/EPRI approach; leak-before-break analysis; reference stress approach

Sažetak
The work presents methods to estimate elastic-plastic semi-elliptical through-wall Crack Opening Displacement (COD) for the Leak-Before-Break analysis of a pressurizer. Usually proposed methods are based on GE/EPRI approach or on the reference stress and J-integral as stress intensity factor (SIF) along the crack tip. J-integral calculation provides the value of SIF at each node of mesh along the crack tip, where values vary from the surface to middle section of material in respect to material properties. COD values are less sensitive to distance from crack tip and material properties. The engineering approach for the calculation of J-integral by using COD values and material full stress-strain data is given. COD values are proportional to surface length of semi-elliptical through wall crack of the pressurizer.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

Napomena
The paper was presented at the Eleventh Meeting "New Trends in Fatigue and Fracture" (NT2F11) Polignano a Mare, Italy, 3-6 July, 2011



POVEZANOST RADA


Projekt / tema
152-1201910-1909 - Analiza i procjena loma konstrukcija iz anizotropnih materijala (Dražan Kozak, )

Ustanove
Strojarski fakultet, Slavonski Brod

Autor s matičnim brojem:
Dražan Kozak, (190253)