Reproducibility of energy absorprption efficiency of aluminium foams (CROSBI ID 588258)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Grilec, Krešimir ; Bojanić, Vedran
engleski
Reproducibility of energy absorprption efficiency of aluminium foams
Aluminium foam is, principally, a composite material consisting of aluminium or aluminium alloy matrix and of pores filled up with a gas distributed throughout the matrix. This paper studies the reproducibility of aluminium foams energy absorption efficiency. Samples of aluminium foam were produced from an Alulight precursor (AlMgSi0.6 TiH2-0.4). This precursor was placed into a mould form and heated up until the agent starts to foam. Immediately thereafter the mould is taken out of the furnace and cooled off, so the aluminium foam part is frozen in shape. The ability of samples to absorb mechanical energy was estimated from the results of compression tests. Tests were carried out by a universal test machine. Test results showed that aluminium foams have good energy absorption efficiency and repeatability is relatively low.
aluminium foams; energy absorption efficiency; compression test
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
93-98.
2012.
objavljeno
Podaci o matičnoj publikaciji
MATRIB 2012
Alar, Željko ; Jakovljević, Suzana
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT)
1848-5340
Podaci o skupu
International Conference on Materials, Tribology, Recycling MATRIB 2012
predavanje
20.06.2012-22.06.2012
Vela Luka, Hrvatska