Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 586659

Optimization of hard turning process parameters with PCBN tool based on the Taguchi method


Puh, Franko; Šegota, Toni; Jurković, Zoran
Optimization of hard turning process parameters with PCBN tool based on the Taguchi method // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 2; 415-419 (međunarodna recenzija, članak, znanstveni)


CROSBI ID: 586659 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Optimization of hard turning process parameters with PCBN tool based on the Taguchi method

Autori
Puh, Franko ; Šegota, Toni ; Jurković, Zoran

Izvornik
Tehnicki Vjesnik-Technical Gazette (1330-3651) 19 (2012), 2; 415-419

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
ANOVA; hard turning; regression analysis; surface roughness; Taguchi method

Sažetak
In this paper, the Taguchi method is applied to find optimum process parameters for hard turning of hardened steel AISI 4142 using PCBN tool. Orthogonal design (L9 (3 4 )), signal-to-noise ratio (S/N) and analysis of variance (ANOVA) are applied to study performance characteristics of cutting parameters (cutting speed, feed and depth of cut) with consideration of surface roughness. Significant factors affecting surface roughness were identified, and the optimal cutting combination was determined by seeking the best surface roughness (response) and signal-to-noise ratio. Using multiple regression the exponential, first order linear and second order prediction models were obtained to find the correlation between surface roughness and independent variables. Finally, confirmation tests verified that theTaguchi design was successful in optimizing turning parameters for surface roughness.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Temeljne tehničke znanosti



POVEZANOST RADA


Projekti:
069-0000000-3264 - Projektiranje modela organizacijskih struktura kooperacijskih mreža (Cukor, Goran, MZOS ) ( POIROT)
069-0692976-1738 - Istraživanje visokoproduktivnih obrada na inteligentnim obradnim sustavima (Kuljanić, Elso, MZOS ) ( POIROT)

Ustanove:
Tehnički fakultet, Rijeka

Profili:

Avatar Url Zoran Jurković (autor)

Citiraj ovu publikaciju

Puh, Franko; Šegota, Toni; Jurković, Zoran
Optimization of hard turning process parameters with PCBN tool based on the Taguchi method // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 2; 415-419 (međunarodna recenzija, članak, znanstveni)
Puh, F., Šegota, T. & Jurković, Z. (2012) Optimization of hard turning process parameters with PCBN tool based on the Taguchi method. Tehnicki Vjesnik-Technical Gazette, 19 (2), 415-419.
@article{article, year = {2012}, pages = {415-419}, keywords = {ANOVA, hard turning, regression analysis, surface roughness, Taguchi method}, journal = {Tehnicki Vjesnik-Technical Gazette}, volume = {19}, number = {2}, issn = {1330-3651}, title = {Optimization of hard turning process parameters with PCBN tool based on the Taguchi method}, keyword = {ANOVA, hard turning, regression analysis, surface roughness, Taguchi method} }
@article{article, year = {2012}, pages = {415-419}, keywords = {ANOVA, hard turning, regression analysis, surface roughness, Taguchi method}, journal = {Tehnicki Vjesnik-Technical Gazette}, volume = {19}, number = {2}, issn = {1330-3651}, title = {Optimization of hard turning process parameters with PCBN tool based on the Taguchi method}, keyword = {ANOVA, hard turning, regression analysis, surface roughness, Taguchi method} }

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus





Contrast
Increase Font
Decrease Font
Dyslexic Font