Napredna pretraga

Pregled bibliografske jedinice broj: 586658

Impact of structure and building orientation on strentgh of 3d printed models


Galeta, Tomislav; Raos, Pero; Somolanji, Marija
Impact of structure and building orientation on strentgh of 3d printed models // KGK-Kautschuk Gummi Kunststoffe, 65 (2012), 10; 36-42 (međunarodna recenzija, članak, znanstveni)


Naslov
Impact of structure and building orientation on strentgh of 3d printed models

Autori
Galeta, Tomislav ; Raos, Pero ; Somolanji, Marija

Izvornik
KGK-Kautschuk Gummi Kunststoffe (0948-3276) 65 (2012), 10; 36-42

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Additive manufacturing; lattice-shaped structures; rapid prototyping; tensile strength; three-dimensional printing

Sažetak
The main objective of research was to determine the impact of sample’s structure and building orientation on the tensile strength of 3D printed samples and thus to determine the combination that provides the highest strength. Test samples were prepared on a Z Corporation’s 3D printer model Z310, with variations of internal geometrical structure, variations of longitudinal orientation and also variations of base alignment. Results of tensile test revealed that the honeycomb structured samples built by orienting along axis Y and aligned over their thinner bases inside the printer building box exhibit the highest strength. Moreover, analysis of variance revealed that only individual main factors (structure, orientation and base) and the interaction of all three of them are significant, as well. All experiment combinations revealed applicable strength when compared to full-bodied samples

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
152-1521473-1474 - Napredni postupci izravne izradbe polimernih proizvoda (Pero Raos, )
152-1521473-1476 - Suvremene tehnologije spajanja lakih strojarskih konstrukcija (Ivan Samardžić, )
152-1521473-3111 - Značajke proizvoda za sveukupnu realizaciju proizvoda kod brze proizvodnje (Milan Kljajin, )
152-1521781-2235 - Razvoj ERP sustava za digitalno poduzeće (Tomislav Šarić, )

Ustanove
Strojarski fakultet, Slavonski Brod

Časopis indeksira:


  • Current Contents Connect (CCC)
  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus