Finite-volume stress analysis in multi-material linear elastic body (CROSBI ID 185090)
Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Tuković, Željko ; Ivanković, Alojz ; Karač, Aleksandar
engleski
Finite-volume stress analysis in multi-material linear elastic body
Correct calculation of stresses at the interface of bonded or otherwise joined materials plays a significant role in many applications. It is therefore important that traction at the material interface is calculated as accurately as possible. This paper describes procedures that can be employed to achieve this goal by using centre-based finite-volume method. Total traction at the interface is calculated by decomposing it into normal and tangential components, both being calculated at each side of the interface, and applying the continuity assumption. The way in which the traction approximation is achieved depends on calculation of tangential gradient of displacement at the interface. To this end, three different methods are proposed and validated against problems with known solutions. It was shown that all methods can be successfully used to simulate problems with multi-material domains, with the procedure based on finite area method being most accurate.
linear elasticity; multi-material interface; collocated finite-volume method; segregated solution procedure; finite area method; OPENFOAM
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o izdanju
93 (4)
2013.
400-419
objavljeno
0029-5981
1097-0207
10.1002/nme.4390
Povezanost rada
Strojarstvo