A Contribution to the Calculation of the Loading Capacity of Internal High Contact Ratio Gears (CROSBI ID 587832)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Vrcan, Željko ; Lovrin, Neven ; Križan, Božidar
engleski
A Contribution to the Calculation of the Loading Capacity of Internal High Contact Ratio Gears
Design optimisations have lead to increased gearbox power ratings, with reduced size and weight. This has lead to the use of high contact ratio (HCR) gears, because these gears distribute the load between at least two tooth pairs in mesh, enabling the use of smaller and lighter gears. The loading capacity of internal gears has not been thoroughly researched yet, and even less has been done so far on internal HCR gears. The purpose of this paper is to present a viable alternative to the method outlined in ISO 6336 and a comparison with results obtained using finite element method analysis.
gears; high contact ratio; loading capacity; tooth root stress
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
309-316.
2012.
objavljeno
Podaci o matičnoj publikaciji
Proceedings - The Seventh International Symposium "KOD 2012"
Kuzmanović, Siniša ; Vereš, Miroslav
Novi Sad: Faculty of Technical Sciences, Novi Sad, Serbia
978-86-7892-399-9
Podaci o skupu
The Seventh International Symposium Machine and Industrial Design in Mechanical Engineering "KOD 2012"
predavanje
24.05.2012-26.05.2012
Balatonfüred, Mađarska