Napredna pretraga

Pregled bibliografske jedinice broj: 584526

Influential factors in the surface hardness testing of a nitrided layer


Cajner, Franjo; Landek, Darko; Kumić, Ivan; Vugrinčić, Amalija
Influential factors in the surface hardness testing of a nitrided layer // Materiali in tehnologije, 47 (2013), 4; 531-533 doi:UDK 621.785.53:519.233.4 (međunarodna recenzija, članak, znanstveni)


Naslov
Influential factors in the surface hardness testing of a nitrided layer

Autori
Cajner, Franjo ; Landek, Darko ; Kumić, Ivan ; Vugrinčić, Amalija

Izvornik
Materiali in tehnologije (1580-2949) 47 (2013), 4; 531-533

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Nitriding layer ; nitrocarburizing ; surface hardness

Sažetak
Nitrocarburizing is one of the frequently applied processes that significantly improve the service life of steel parts in the complex activity of mechanical loads, wear, and corrosion damages. Characterization and confirmation of the quality of a nitrided/nitrocarburized layer is a prescribed norm which includes the determination of surface hardness, nitriding hardening depth, compound zone thickness and its porosity. In the testing of surface hardness, in spite of determined conditions, there are additional factors that can affect the obtained result and can lead to a misunderstanding between the customer and the provider of the service of nitriding. In this paper, possible influential factors related to the surface hardness are considered and statistically analyzed by the ANOVA two factor test. The considered influential factors are: surface preparation method and loading force. Tests carried out during the research indicated a significant influence of the loading force and of the surface preparation on the results of the nitrided/nitrocarburized steel surface hardness. Also, the indentation size effect is confirmed in the hardness tests with a small loading force.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

Napomena
Rad je kao poster prezentiran na skupu The 20th Jubilee Conference on Materials and Technology 17– 19 October 2012, Portoroz, Slovenia



POVEZANOST RADA


Projekt / tema
120-1201780-1779 - Modeliranje svojstava materijala i parametara procesa (Tomislav Filetin, )
120-1201833-1791 - Inženjerstvo površina u proizvodnji konstrukcijskih dijelova i alata (Franjo Cajner, )

Ustanove
Fakultet strojarstva i brodogradnje, Zagreb

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Uključenost u ostale bibliografske baze podataka:


  • METADEX: Metals Science
  • Scopus


Citati