Napredna pretraga

Pregled bibliografske jedinice broj: 583671

Corroded pipe integrity assessment according to SINTAP procedure


Kozak, Dražan; Marković, Zlatko; Baškarić, Tomislav
Corroded pipe integrity assessment according to SINTAP procedure // Metalurgija
Zagreb, 2012. str. 405-405 (poster, nije recenziran, sažetak, stručni)


Naslov
Corroded pipe integrity assessment according to SINTAP procedure

Autori
Kozak, Dražan ; Marković, Zlatko ; Baškarić, Tomislav

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, stručni

Izvornik
Metalurgija / - Zagreb, 2012, 405-405

Skup
10. Međunarodni simpozij Hrvatskog metalurškog društva “Materijali i metalurgija”

Mjesto i datum
Šibenik, Hrvatska, 17.-21.6.2012

Vrsta sudjelovanja
Poster

Vrsta recenzije
Nije recenziran

Ključne riječi
Vrelovodna cijev; korozijsko oštećenje; procjena cjelovitosti; SINTAP
(Hot water pipe; corrosion defect; integrity assessment; SINTAP)

Sažetak
SINTAP procedure gives a comprehensive approach to assessing the integrity of structural components with damage. In this investigation SINTAP procedure has been applied to the hot water pipe with detected corrosion damage that is in operation for more than 15 years of centmlized hot water system, in the City of Osijek. It is a steel pipe 273 x 5 with the measured corrosion damage of 1, 5 mm in depth and 68 mm in length, which is loaded in the exploitation of internal overpressure of 12 bar. Performed analysis based on the FAD approach given in SINTAP procedure shows that for a specified load and measured size of the pipe corrosion damage is sill running deep into the safe area and there is no danger of leak.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Ustanove
Strojarski fakultet, Slavonski Brod