Calibration method for velocity of detonation measuring device (CROSBI ID 586161)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Dobrilović, Mario ; Bohanek, Vječislav ; Škrlec, Vinko
engleski
Calibration method for velocity of detonation measuring device
The velocity of detonation is one of basic parameters for determination of explosive power and quality that can be measured. Delay period is of the same importance for detonators and other initiation devices. Determination of those parameters is mainly performed by optical- electrical method by time interval measurement. In Laboratory for testing of explosive material, a method was developed for the calibration of electronic timer with photodiodes and digital oscilloscope. Calibration of electronic timer, velocity of detonation measuring device, is carried out by parallel measuring of a time interval by a digital oscilloscope. Paper describes the setup and measurement conditions, type of instrumentation and accessories of comparison calibration method with review according to the measuring uncertainty and method suitability.
explosive materials testing; calibration; velocity of detonation; electro-optical method
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
495-501.
2012.
objavljeno
Podaci o matičnoj publikaciji
Proceeding of 15th international seminar “NEW TRENDS IN RESEARCH OF ENERGETIC MATERIALS”
Pachmáň, Jiří, Šelešovský, Jakub, Matyáš, Robert
Pardubice: University of Pardubice
978-80-7395-480-2
Podaci o skupu
15TH INTERNATIONAL SEMINAR “NEW TRENDS IN RESEARCH OF ENERGETIC MATERIALS”
poster
18.04.2012-20.04.2012
Pardubice, Češka Republika