Sequential ultrasonic transducer for echo sounders on small and middle size vessels (CROSBI ID 477763)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Štimac, Alan ; Komeštik, Vladislav ; Ivančević, Bojan
engleski
Sequential ultrasonic transducer for echo sounders on small and middle size vessels
The aim of the study was to evaluate the possibility to use both significant modes of piezoelectric disc vibration to acchieve permanent contact of ultrasonic beam between the sea bed or reefs with wessel keel, where ultrasonic transducer are usually mounted. Starting with the theoretical analysis of piezoelectric element vibration in radial and thickness mode and construction requirements for ultrasonic transducers, electrical, acoustical and hidroacoustical parameters on both characteristical frequencies have been compared. Having in mind that most of commercial type echo sounders operate at thickness resonance frequency of the piezoelectric element and on the basis of obtained data, this paper confirms the practicability of using piezoelectric element vibration in radial mode for acchieving longer measuring ranges, with reduced accuracy and resolution, but with receiving/transmitting sensitivity and horizontal/vertical directivity comparable to those of the thickness mode.
beam pattern; sensitivity; sonar equation; ultrasonic transducer
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
208-211-x.
1999.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 15th International Conference on Applied Electromagentics and Communications
Bartolić, Juraj
Zagreb: Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA)
Podaci o skupu
15th International Conference on Applied Electromagentics and Communications
predavanje
11.10.1999-13.10.1999
Dubrovnik, Hrvatska