Napredna pretraga

Pregled bibliografske jedinice broj: 564672

Laminated object manufacturing vs. Fused deposition modeling : machine comparison


Pilipović, Ana; Šercer, Mladen; Stojanović, Ivan; Brajlih, Tomaž; Drstvenšek, Igor; Valentan, Bogdan
Laminated object manufacturing vs. Fused deposition modeling : machine comparison // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM World Symposium "Intelligent Manufacturing and Automation : Power of Knowledge and Creativity" / Katalinić, Branko (ur.).
Vienna: DAAAM International Vienna, 2011. str. 221-222 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Laminated object manufacturing vs. Fused deposition modeling : machine comparison

Autori
Pilipović, Ana ; Šercer, Mladen ; Stojanović, Ivan ; Brajlih, Tomaž ; Drstvenšek, Igor ; Valentan, Bogdan

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM World Symposium "Intelligent Manufacturing and Automation : Power of Knowledge and Creativity" / Katalinić, Branko - Vienna : DAAAM International Vienna, 2011, 221-222

ISBN
978-3-901509-83-4

Skup
DAAAM World Symposium "Intelligent Manufacturing and Automation : Power of Knowledge and Creativity" (22 ; 2011)

Mjesto i datum
Vienna, Austrija, 23.-26.11.2011

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Fused deposition modeling - FDM; laminated object manufacturing - LOM; tensile strength; modulus of elasticity; UV light

Sažetak
Products made by additive manufacturing are increasingly replacing the products made by classical procedures of polymer processing. The current market requires the products to be of good mechanical properties, low prices, and complicated geometry. With the procedures such as Fused Deposition Modelling and Laminated Object Manufacturing it is possible to produce a product of relatively low price and good mechanical properties. In practice it is impossible to avoid using the products in various atmospheric conditions (e.g. UV radiation and humid environment) either intentionally or unintentionally. The UV light, the Sun being its usual source, , and the average humidity of countries worldwide can vary from 20% to 90%, depending on the weather, day and geographic location. It is therefore necessary to determine how UV light, after a longer exposure, affects the final mechanical properties of the products. A comparison of tensile strength and elasticity module of the test specimens in FDM and LOM procedures has been performed.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

Napomena
ISSN 1726-9679



POVEZANOST RADA


Projekt / tema
120-1201767-1764 - Lokalni korozijski fenomeni na nehrđajućih čelicima i njihovo sprečavanje (Ivan Juraga, )
120-1521473-1808 - Povišenje učinkovitosti razvoja i preradbe polimernih proizvoda (Mladen Šercer, )

Ustanove
Fakultet strojarstva i brodogradnje, Zagreb