Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 561406

Comparison of Materials Fracture Resistance Based on J-criterion


Vukelić, Goran; Brnić, Josip
Comparison of Materials Fracture Resistance Based on J-criterion // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1411-1412 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 561406 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Comparison of Materials Fracture Resistance Based on J-criterion

Autori
Vukelić, Goran ; Brnić, Josip

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko - Beč : DAAAM International Vienna, 2011, 1411-1412

ISBN
978-3-901509-83-4

Skup
22nd DAAAM International Symposium "Intelligent Manufacturing & Automation: Power of Knowledge and Creativity"

Mjesto i datum
Beč, Austrija, 23-26.11.2011

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
fracture; AISI 304; AISI 316L; CT specimen; J-integral; FE analysis

Sažetak
The fracture behavior of compact type (CT) specimens made of two different materials, steel AISI 304 and AISI 316L was numerically analyzed in this paper. The comparison of the two materials was based on the obtained values of J-integral, an important fracture mechanics parameter. The single specimen test method, commonly used in experimental determination of J-integral, was numerically modeled using finite element (FE) software. Consequently, a new numerical algorithm was developed for J-integral calculation on the basis of finite element (FE) analysis results. The paper sets out numerically obtained J-integral values presented as measure of crack driving force versus crack growth size (Δa) for three initial measures of a specimen crack size, being a/W = 0.25, 0.5, 0.75.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
069-0691736-1737 - Numerička analiza odziva konstrukcija za određena područja eksploatacije (Brnić, Josip, MZOS - )

Ustanove
Tehnički fakultet, Rijeka

Profili:

Avatar Url Goran Vukelić (autor)

Avatar Url Josip Brnić (autor)

Citiraj ovu publikaciju

Vukelić, Goran; Brnić, Josip
Comparison of Materials Fracture Resistance Based on J-criterion // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1411-1412 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Vukelić, G. & Brnić, J. (2011) Comparison of Materials Fracture Resistance Based on J-criterion. U: Katalinić, B. (ur.)Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium.
@article{article, editor = {Katalini\'{c}, B.}, year = {2011}, pages = {1411-1412}, keywords = {fracture, AISI 304, AISI 316L, CT specimen, J-integral, FE analysis}, isbn = {978-3-901509-83-4}, title = {Comparison of Materials Fracture Resistance Based on J-criterion}, keyword = {fracture, AISI 304, AISI 316L, CT specimen, J-integral, FE analysis}, publisher = {DAAAM International Vienna}, publisherplace = {Be\v{c}, Austrija} }




Contrast
Increase Font
Decrease Font
Dyslexic Font