EXPERIMENTAL INVESTIGATION OF SURFACE ROUGHNESS OBTAINED BY ABRASIVE WATER JET MACHINING (CROSBI ID 577536)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Mutavgjić, Veselko ; Jurković, Zoran ; Franulović, Marina ; Mandić, Vesna
engleski
EXPERIMENTAL INVESTIGATION OF SURFACE ROUGHNESS OBTAINED BY ABRASIVE WATER JET MACHINING
Abrasive water jet machining is classified a non-conventional machining procedure. Abrasive water jet machining uses water jet under high pressure as a tool, with added particles of abrasives. The most significant characteristic of the abrasive water jet cutting technology is cold cutting, which does not have a thermic effect on the material. The objective of the experimental investigation is to conduct research of the machining parametres' impact on surface roughness of the machined parts, and derive conclusions referring to the manner in which certain machining parametres affect surface roughness. Experimental investigation was conducted in the way that samples of two different materials were cut on the machine using different machining parametres. Measurement of different surface roughness parametres has been conducted after the cutting.
abrasive water jet machining; surface roughness; experimental investigation
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
73-76.
2011.
objavljeno
Podaci o matičnoj publikaciji
15th International Research/Expert Conference - TMT 2011
Ekinović, Sabahudin ; Vivancos Calvet, Joan ; Tacer, Emin
Zenica: Faculty of Mechanical Engineering, Escola Tecnica Superior D'Enginyeria Industrial de Barcelona, Bahçeşehir University Istanbul
1840-4944
Podaci o skupu
Trends in the Development of Machinery and Associated Technology
predavanje
12.09.2011-18.09.2011
Prag, Češka Republika