Napredna pretraga

Pregled bibliografske jedinice broj: 532177

Skidder with single-drum or double-drum winch in mountainous areas – A case study from selective forests of Croatia


Zečić, Željko; Vusić, Dinko; Milković, Dragan; Zorić, Marko
Skidder with single-drum or double-drum winch in mountainous areas – A case study from selective forests of Croatia // 44 th International Symposium on Forestry Mechanisation (FORMEC), Pushing the Boundaries with Research and Innovation in Forest Engineering / Stampfer, Karl (ur.).
Graz/Beč: BOKU, 2011. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Skidder with single-drum or double-drum winch in mountainous areas – A case study from selective forests of Croatia

Autori
Zečić, Željko ; Vusić, Dinko ; Milković, Dragan ; Zorić, Marko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
44 th International Symposium on Forestry Mechanisation (FORMEC), Pushing the Boundaries with Research and Innovation in Forest Engineering / Stampfer, Karl - Graz/Beč : BOKU, 2011

Skup
44 th International Symposium on Forestry Mechanisation (FORMEC), Pushing the Boundaries with Research and Innovation in Forest Engineering

Mjesto i datum
Graz, Austrija, 09-13.10.2011.

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Timber skidding; productivity; Timberjack 240C

Sažetak
In selection forests of Croatia, because of the stand and extraction factors, we are generally compelled to use skidders for the primary transport of wood. Most of the skidders used in Croatian forestry are equipped with a double-drum winch. Of the 45 Timberjack 240C skidders 30 are equipped with a double-drum, and 15 with a single-drum winch. Between 0.25 mil. m3 and 0.30 mil. m3 of round-wood is annually skidded with these machines, mainly in hilly and mountainous regions of our country. This study was set up to determine the difference in single-drum equipped skidder’s productivity and double-drum equipped skidder’s productivity. By applying time and motion study methods half-length skidding work process in selective cut was recorded. The differences between the speeds, fixed times consumptions and load volume were analysed by a T-test. Daily outputs based on the eight-hour work time were calculated. It was found that the skidder equipped with a single-drum winch achieved from 11% to 9% lower projected daily output at distances from 100 m to 800 m than the skidder equipped with a double-drum winch.

Izvorni jezik
Engleski

Znanstvena područja
Šumarstvo



POVEZANOST RADA


Projekt / tema
068-0682111-2112 - Ekološko, energijsko i ergonomsko vrednovanje šumskih strojeva i opreme (Dubravko Horvat, )
068-0682111-3002 - Unapređenje tehnologija pridobivanja drva u cilju zaštite okoliša i radnika (Željko Zečić, )

Ustanove
Šumarski fakultet, Zagreb