Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Critical overview of modified hydraulic bulging in determination of flaw stress curve (CROSBI ID 576220)

Prilog sa skupa u zborniku | ostalo | međunarodna recenzija

Math, Miljenko ; Keran, Zdenka ; Piljek, Petar Critical overview of modified hydraulic bulging in determination of flaw stress curve // Proceedings of International Conference on Innovative Technologies IN-TECH / Jan, Kudlaček ; Zlatan, Car ; Tomaž, Pepelnjak et al. (ur.). Bratislava: Tisk AS, 2011. str. 368-370

Podaci o odgovornosti

Math, Miljenko ; Keran, Zdenka ; Piljek, Petar

engleski

Critical overview of modified hydraulic bulging in determination of flaw stress curve

. In this study novel method of recording the true stress – strain curves, originally derived from well known hydraulic bulging test has been critically reconsidered. New method allows more accurate determination of membrane stress in the deforming material. Assumption on the bulk geometry is no longer needed since modification, using sphere as an obstacle, determines the radius of curvature needed in acquisition of membrane stress. Use of the small transducer integrated in tooling, enables acquisition of force and thus reliable stress acquisition upon the known (spherical) geometry. Performing modified hydraulic bulging upon just one test specimen yields three points of stress-strain curve. Two different sheet thicknesses and two different sphere diameters have been researched in attempt to establish whether the assumption of membrane stress can be somewhat neglected or disregarded. The modified method has proved to be adequate for checking the numerical model, because it enables direct experimental measurement of the true stresses in the material, which cannot be obtained when classical hydraulic bulging test is performed.

Modified hydraulic bulging; flow stress–strain curve; hydroforming; FE simulation

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

368-370.

2011.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of International Conference on Innovative Technologies IN-TECH

Jan, Kudlaček ; Zlatan, Car ; Tomaž, Pepelnjak ; Michal, Pakosta

Bratislava: Tisk AS

978-80-904502-6-4

Podaci o skupu

International Conference on Innovative Technologies

pozvano predavanje

01.09.2011-03.09.2011

Bratislava, Slovačka

Povezanost rada

Strojarstvo