Napredna pretraga

Pregled bibliografske jedinice broj: 528219

Optimization of cutting parameters for surface roughness in abrasive water jet machining


Mutavgjić, Veselko; Jurković, Zoran; Perinić, Mladen; Mandić, Vesna
Optimization of cutting parameters for surface roughness in abrasive water jet machining // 2nd International Conference MTSM 2011 / Živković, Dražen (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, 2011. str. 105-110 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Optimization of cutting parameters for surface roughness in abrasive water jet machining

Autori
Mutavgjić, Veselko ; Jurković, Zoran ; Perinić, Mladen ; Mandić, Vesna

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
2nd International Conference MTSM 2011 / Živković, Dražen - Split : Hrvatsko društvo za strojarske tehnologije, 2011, 105-110

Skup
Mechanical Technologies and Structural Materials

Mjesto i datum
Split, Hrvatska, 29-30.09.2011

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Abrasive water jet machining; surface roughness; Taguchi method; cutting parameters optimization

Sažetak
Abrasive water jet machining belongs to the non-conventional machining processes. Abrasive water jet machining as a tool used by water jet under high pressure with the addition of abrasive particles. The most important characteristic of this technology is a cold cut that heat does not affect the material and a wide range of materials and thicknesses can be machined. The aim of this paper is to conduct the experimental research of process parameters influence on surface roughness of the machined parts, and obtained data on how the process parameters affecting the surface roughness. The research was carried out for two different materials (stainless steel and aluminium alloy) using orthogonal experiment plan. Based on the obtained experimental results are defined by the optimal values of process parameters, verified through confirmation tests, to minimize surface roughness by using Taguchi method.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
069-0000000-3264 - Projektiranje modela organizacijskih struktura kooperacijskih mreža (Goran Cukor, )
069-0692976-1738 - Istraživanje visokoproduktivnih obrada na inteligentnim obradnim sustavima (Elso Kuljanić, )
069-0692976-1740 - Modeliranje naprednih proizvodnih struktura kod inteligentne proizvodnje (Tonči Mikac, )

Ustanove
Tehnički fakultet, Rijeka