Napredna pretraga

Pregled bibliografske jedinice broj: 525977

Application of a 3D terrestrial laser scanner in industrial applications on the example of objects on gas line "Slobodnica – Donji Miholjac"


Babić, Luka; Đapo, Almin; Pribičević, Boško
Application of a 3D terrestrial laser scanner in industrial applications on the example of objects on gas line "Slobodnica – Donji Miholjac" // Proceedings of the 5th International Conference on Engineering Surveying INGEO 2011. / Kopáčik, Alojz ; Kyrinovič, Peter ; Roić, Miodrag (ur.).
Brijuni, 2011. str. 71-76 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


Naslov
Application of a 3D terrestrial laser scanner in industrial applications on the example of objects on gas line "Slobodnica – Donji Miholjac"

Autori
Babić, Luka ; Đapo, Almin ; Pribičević, Boško

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 5th International Conference on Engineering Surveying INGEO 2011. / Kopáčik, Alojz ; Kyrinovič, Peter ; Roić, Miodrag - Brijuni, 2011, 71-76

Skup
5th International Conference on Engineering Surveying

Mjesto i datum
Brijuni, Hrvatska, 22-24.09.2011.

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Major gas line; terrestrial laser scanning; modeling; visualization

Sažetak
Every project of a major gas line contains a series of service stations that allow inspection and maintenance of the gas line as well as being points for possible emergency interventions in case of accident. As with any other project, the prerequisite for a successful completion of a gas line project is conducting an inspection on the as built condition. One such gas line is the main gas line "Slobodnica - Donji Miholjac DN800". The construction work on that main gas line started in December 2009 and ended in September 2011. The prerequisite for a successful completion can only be met by conducting adequate measurements that provide enough information for all professions involved in the project. Using a 3D terrestrial laser scanner for measuring, and later on for modeling, allows surveyors to easily make such a complete representation. A detailed model created from scan data is accurate, realistic and clear. The difference between this method and classical surveying methods is that it provides the end users with more than just a schematic that can only be understood by experts. Thus the work of each contractor can be evaluated and used as proof that the work is done according to the project specifications, and also provide an investor with a high quality as built model for easier inspection, maintenance and analysis. This paper describes the process of measuring, analyzing, modeling and, in the end, creating a 3D visualization of one of the service objects on the main gas line "Slobodnica - Donji Miholjac DN 800".

Izvorni jezik
Engleski

Znanstvena područja
Geodezija



POVEZANOST RADA


Projekt / tema
007-0072974-2281 - Suvremene geodetske ultrazvučne metode u održivom razvoju krških područja (Boško Pribičević, )

Ustanove
Geodetski fakultet, Zagreb