Aluminium bronze as an "insulator" (CROSBI ID 575462)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Marušić, Vlatko ; Rosandić, Željko ; Rozing, Goran
engleski
Aluminium bronze as an "insulator"
The characteristics of aluminium bronze deposited on the base metal of the tooling for deep drawing are shown in this paper. This tooling is used in the forming of CrNi stainless steel sheets. During processing, the particles of steel material of tooling must be prevented from penetrating the surface layer of workpiece. They must be “insulated” from each other. The deposit made for this testing was the aluminium bronze/steel compound. CuAl-A3 alloy was deposited on St 52-3 N base metal by the cladding procedure. Measuring of dimensions, metallographic analysis and hardness testing were performed before and after the heat treatment, and after compressing of the test samples. It was determined that the chosen parameters of cladding can give good “insulation” layer between the base metal of tooling and the workpiece.
aluminium bronze ; cladding ; hardness ; metallographic analysis
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
71-79.
2011.
nije evidentirano
objavljeno
978-86-6075-027-5
Podaci o matičnoj publikaciji
PROCEEDINGS OF THE 11th INTERNATIONAL CONFERENCE "RESEARCH AND DEVELOPMENT IN MECHANICAL INDUSTRY" RaDMI 2011, VOL. 1
Dašić, Predrag V.
Vrnjačka Banja: SaTCIP (Scientific and Technical Center for Intellectual Property)
Podaci o skupu
11th INTERNATIONAL CONFERENCE "RESEARCH AND DEVELOPMENT IN MECHANICAL INDUSTRY" RaDMI 2011
pozvano predavanje
15.09.2011-18.09.2011
Soko Banja, Srbija