CHARACTERIZATION OF THE COOLING LIQUID AFTER THE MACHINING OF ALUMINA CERAMICS (CROSBI ID 573817)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Pedišić, Ljiljana ; Ćurković, Lidija ; Ciglar, Damir ; Matijašić, Gordana
engleski
CHARACTERIZATION OF THE COOLING LIQUID AFTER THE MACHINING OF ALUMINA CERAMICS
A synthetic liquid (5 % water solution) was used during the fine grinding of alumina (Al2O3) ceramics. In order to characterize the synthetic liquid, its physical and chemical properties, corrosion protection, foaming, coolant and lubricant properties were determined. These parameters were determined before machining and after fine grinding. The liquid contains particles of the treated material after fine grinding. Therefore, the particle size distribution was determined in order to select a method for removing solid particles before the liquid is reused. Results of investigation indicated that the physical and chemical properties of the used synthetic liquid did not change after machining, which means that the liquid can be reused after an adequate solid-liquid separation method has been applied.
synthetic liquid; fine grinding; Al2O3 ceramics.
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
183-186.
2011.
objavljeno
Podaci o matičnoj publikaciji
13th Interantional Scientific Conference on Production Engineering
Abele, E. ; Udiljak, T. ; Ciglar, D.
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)
978-953-7689-01-8
Podaci o skupu
Computer integrated manufacturing and high speed machining
poster
16.06.2011-18.06.2011
Biograd na Moru, Hrvatska