Napredna pretraga

Pregled bibliografske jedinice broj: 517519

Experimental testing of quality of polymer parts produced by Laminated Object Manufacturing – LOM


Pilipović, Ana; Raos, Pero; Šercer, Mladen
Experimental testing of quality of polymer parts produced by Laminated Object Manufacturing – LOM // Tehnički vjesnik, 18 (2011), 2; 253-260 (podatak o recenziji nije dostupan, prethodno priopcenje, znanstveni)


Naslov
Experimental testing of quality of polymer parts produced by Laminated Object Manufacturing – LOM

Autori
Pilipović, Ana ; Raos, Pero ; Šercer, Mladen

Izvornik
Tehnički vjesnik (1330-3651) 18 (2011), 2; 253-260

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, prethodno priopcenje, znanstveni

Ključne riječi
Dimensional accuracy; flexural properties; LOM; roughness; tensile properties

Sažetak
Rapid prototyping procedures make it possible to produce relatively complicated geometries based on the computer 3D model of products in relatively short time. This requires that the respective product features have good quality, good mechanical properties, dimensional accuracy and precision. However, the number of available materials that can be used for prototyping is limited and their properties can differ significantly from the properties of the finished product. However, RP parts are not inexpensive and sometimes it is difficult to decide which procedure to use to manufacture them in order to obtain their maximal usability. The Laminated Object Manufacturing (LOM) procedure can be used to produce low cost polymeric products (from poly(vinyl chloride)) that have to meet certain mechanical properties, especially if they are used to perform functional tests. Past studies in LOM procedure have been carried out mainly with paper, and a few on metal. The paper deals with testing the influence of the position of products in the machine working area on the mechanical properties (tensile and flexural properties) of the product.

Izvorni jezik
Hrvatski, engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
120-1521473-1808 - Povišenje učinkovitosti razvoja i preradbe polimernih proizvoda (Mladen Šercer, )
152-1521473-1474 - Napredni postupci izravne izradbe polimernih proizvoda (Pero Raos, )

Ustanove
Fakultet strojarstva i brodogradnje, Zagreb,
Strojarski fakultet, Slavonski Brod

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus