Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Angular Rate Gyros and Mass Flow Sensors: A Unified Approach (CROSBI ID 476262)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Kesić, Petar ; Damić, Vjekoslav Angular Rate Gyros and Mass Flow Sensors: A Unified Approach // Proceedings of the 2nd Congress of Croatian Society of Mechanics / Marović, Pavao ; Sorić, Jurica ; Vranković, Nikola (ur.). Zagreb: Hrvatsko društvo za mehaniku (HDM), 1997. str. 527-535-x

Podaci o odgovornosti

Kesić, Petar ; Damić, Vjekoslav

engleski

Angular Rate Gyros and Mass Flow Sensors: A Unified Approach

In this paper a unified approach of using the Coriolis force on moving fluid for the purpose of the angular rate and the mass flow rate measurement is presented. The operation of the laminar jet angular rate sensor and the Coriolis mass flow rate meter has been analyzed. In both sensors the Coriolis force was used to generate the metering signal. As a result a new possibility for the angular rate measurements is foreseen. The new method employs an incompressible fluid ciculation or oscillation in a closed loop. Due to the fluid motion in the presence of sensor rotation the Coriolis force is generated. The tube deflects undre the action of the Coriolis force and its motion is used to produce the sensor output signal. An approximate theory was used to analyze the operation of the sensors.

Coriolis force; angular rate sensor; flow rate measurement

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

527-535-x.

1997.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the 2nd Congress of Croatian Society of Mechanics

Marović, Pavao ; Sorić, Jurica ; Vranković, Nikola

Zagreb: Hrvatsko društvo za mehaniku (HDM)

Podaci o skupu

2nd Congress of Croatian Society of Mechanics

predavanje

18.09.1997-20.09.1997

Supetar, Hrvatska

Povezanost rada

Zrakoplovstvo, raketna i svemirska tehnika