Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 51259

CAD Modelling of the Optimal Axial-radial Impeller of the Centrifugal Comressor for CAM


Guzović, Zvonimir; Matijašević, Branimir; Novko, Igor
CAD Modelling of the Optimal Axial-radial Impeller of the Centrifugal Comressor for CAM // Intelligent Manufacturing & Automation: Past-Present-Future / Katalinic, B. (ur.).
Vienna: Danube Adria Association for Automation & Manufacturing, 1999. str. 175-176 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 51259 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
CAD Modelling of the Optimal Axial-radial Impeller of the Centrifugal Comressor for CAM

Autori
Guzović, Zvonimir ; Matijašević, Branimir ; Novko, Igor

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Intelligent Manufacturing & Automation: Past-Present-Future / Katalinic, B. - Vienna : Danube Adria Association for Automation & Manufacturing, 1999, 175-176

Skup
The 10th Internacional DAAAM Symposium "Intelligent Manufacturing & Automation: Past-Present-Future"

Mjesto i datum
Beč, Austrija, 21-23.10.1999

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
centrifugal compressor; impeller; optimal geometry; automated design

Sažetak
The paper presents the problem of the optimal design of axial-radial impeller in a centrifugal compressor, simultaneously satisfying the demands of aerodynamics, strength and technology. In the literature, there are several engineering analytic-graphic methods for the design and checking of the geometry of the axial-radial impeller. By using adequate CAD application software and numerical modelling, one of these is automated and the resultes of the design are given in the paper. The set algorithm is intended for CAM.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA


Projekt / tema
120039 - 120039 (, )

Ustanove
Fakultet strojarstva i brodogradnje, Zagreb

Citiraj ovu publikaciju

Guzović, Zvonimir; Matijašević, Branimir; Novko, Igor
CAD Modelling of the Optimal Axial-radial Impeller of the Centrifugal Comressor for CAM // Intelligent Manufacturing & Automation: Past-Present-Future / Katalinic, B. (ur.).
Vienna: Danube Adria Association for Automation & Manufacturing, 1999. str. 175-176 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Guzović, Z., Matijašević, B. & Novko, I. (1999) CAD Modelling of the Optimal Axial-radial Impeller of the Centrifugal Comressor for CAM. U: Katalinic, B. (ur.)Intelligent Manufacturing & Automation: Past-Present-Future.
@article{article, editor = {Katalinic, B.}, year = {1999}, pages = {175-176}, keywords = {centrifugal compressor, impeller, optimal geometry, automated design}, title = {CAD Modelling of the Optimal Axial-radial Impeller of the Centrifugal Comressor for CAM}, keyword = {centrifugal compressor, impeller, optimal geometry, automated design}, publisher = {Danube Adria Association for Automation and \#38; Manufacturing}, publisherplace = {Be\v{c}, Austrija} }




Contrast
Increase Font
Decrease Font
Dyslexic Font