Stress analysis of thick-walled tubes with different degrees of plasticization (CROSBI ID 568257)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Baškarić, Tomislav ; Damjanović, Darko ; Matejiček, Franjo ; Kozak, Dražan ; Ivandić, Željko
engleski
Stress analysis of thick-walled tubes with different degrees of plasticization
The paper presents analytical analysis for the linear elastic-ideal plastic behaviour of thick-walled tubes under internal pressure. A plasticity theory is used to describe circular, radial and axial stresses in tube wall. Analysis was made for varying degrees of plasticization. According to von Mises yield criterion the pressure in the thick-walled tube was calculated depending on the degree of plasticization. Some of the analytical solutions are verified numerically. The numerical model is defined as a plane, and the material is defined as a linear elastic-ideal plastic.
plasticity theory; thick-waled tube; internal pressure; stress; degree of plasticization
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
215-223.
2010.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of the 2nd International Scientific and Expert Conference TEAM 2010
Arpad, Ferencz ; Klebniczki Jozsef ; Lipoczine, Csabai ; Borsne, Judit ; Csaba, Fabian
Kecskemét: Kecskemét College, Faculty of Mechanical Engineering and Automation
978-963-7294-86-0
1586-846x
Podaci o skupu
International Scientific and Expert Conference TEAM 2010
poster
04.11.2010-05.11.2010
Kecskemét, Mađarska