Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Influence of surface texture on electrochemical potential (CROSBI ID 166669)

Prilog u časopisu | pregledni rad (znanstveni) | međunarodna recenzija

Alar, Vesna ; Runje, Biserka ; Baršić, Gorana Influence of surface texture on electrochemical potential // Materialwissenschaft und Werkstofftechnik, 41 (2010), 10; 875-878. doi: 10.1002/mawe.201000632

Podaci o odgovornosti

Alar, Vesna ; Runje, Biserka ; Baršić, Gorana

engleski

Influence of surface texture on electrochemical potential

In this Paper potentiodynamic and Tafel (anodic and cathodic) polarization tests were conducted in order to relate the dependence of surface roughness on the resistance to pitting corrosion (pitting potential) of AISI 316 stainless steel in spring water at 20°C. Furthermore, uniform corrosion resistance of AISI 316 steel was studied. Tests were performed on seven samples that were polished with emery paper with silicon carbide particles of various grits. Using scanning electron microscope qualitative evaluation of surface roughness was done, and roughness parameter Ra was measured using stylus instrument. Achieved results show that with decreasing mean arithmetic deviation of profile investigated surface significantly increases the resistance to pitting potential, and expands the passivation area of the AISI 316 stainless steel in spring water.

electrochemical potential; surface roughness; stainless steel

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

41 (10)

2010.

875-878

objavljeno

0933-5137

10.1002/mawe.201000632

Povezanost rada

Strojarstvo

Poveznice
Indeksiranost