Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Experimental Determination of Torsional Stiffness in Ribbed Bridge Deck (CROSBI ID 563514)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Grandić, Davor ; Štimac Grandić, Ivana ; Latić, Vildana Experimental Determination of Torsional Stiffness in Ribbed Bridge Deck // Road and Rail Infrastructure / Lakušić, Stjepan (ur.). Zagreb: Građevinski fakultet Sveučilišta u Zagrebu, 2010. str. 489-494

Podaci o odgovornosti

Grandić, Davor ; Štimac Grandić, Ivana ; Latić, Vildana

engleski

Experimental Determination of Torsional Stiffness in Ribbed Bridge Deck

A ribbed bridge decks will structurally behave as a grillage. A grillage has an efficient transverse load distribution, as well as transverse displacement distribution, due to transverse asymmetric load. In the case of bridge deck without diaphragms in the span, transverse load distribution depends on the torsional stiffness of longitudinal girders, diaphragms and deck slab. In standard bridge on-site testing, it is common to measure vertical displacements in the middle of the span and over the supports due to transverse symmetric and asymmetric static loading. A deflection in the middle of the span can be defined from the measured displacements in the middle of the span and over the supports. The results of the on-site testing on nine bridges were collected and used in this paper. The numerical results were calculated on three computational models which differ in torsional stiffness only for each single bridge. In this paper, experimental determination of torsional stiffness of bridge deck elements is carried out by using on site measured bridge deck deflection due to transversal asymmetric loading and adequate computational grillage models. Based on the conducted analyses, the coefficient of torsional stiffness reduction for verification of the serviceability limit state according to Annex C of EN 1990: 2000 is determined. The same coefficient is calculated using recommendation for torsional stiffness reduction in concrete elements defined by Model code CEB-FIP 1990 (MC 90). According to conducted analyses the design value of the coefficient of torsional stiffness reduction for verification of the serviceability limit state is proposed.

ribbed bridge decks; torsional stiffness reduction

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

489-494.

2010.

objavljeno

Podaci o matičnoj publikaciji

Road and Rail Infrastructure

Lakušić, Stjepan

Zagreb: Građevinski fakultet Sveučilišta u Zagrebu

978-953-6272-37-2

Podaci o skupu

First International Conference on Road and Rail Infrastructure - CETRA 2010

predavanje

17.05.2010-18.05.2010

Zagreb, Hrvatska

Povezanost rada

Građevinarstvo