Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Fatigue crack propagation in stiffened panels under tension loading (CROSBI ID 561627)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Božić, Željko ; Parunov, Joško ; Fadljević, Marko Fatigue crack propagation in stiffened panels under tension loading // Proceedings of the International Workshop Advanced Ship Design for Pollution Prevention / Guedes Soares, C ; Parunov, Joško (ur.). London : Delhi: Taylor & Francis, 2010. str. 1-8

Podaci o odgovornosti

Božić, Željko ; Parunov, Joško ; Fadljević, Marko

engleski

Fatigue crack propagation in stiffened panels under tension loading

Fatigue crack growth in stiffened panels under cyclic tension loading was studied in this paper. Results of fatigue crack propagation tests with cyclic stress of constant amplitude and frequency on centrally notched plate and stiffened panel specimens were reported. A numerical crack growth simulation procedure based on integration of Paris equation was introduced and fatigue lifetime was simulated for the specimens. Implementing the introduced procedure crack propagation in a main deck longitudinal of a double-hull oil tanker was analyzed. The Mode I, II and III Stress Intensity Factors (SIFs) were determined in a FEA using singular elements. Compared to Mode I SIF values, the Mode II and III values were small and did not influence structural components fatigue lifetime significantly. Secondary bending which occurs due to the cut stiffeners or flanges has been taken into account in the stress intensity factor determination. The study showed a significant influence of secondary bending on crack growth rate in stiffened panels. Also, it was shown that an increase in nominal loading stress range of 10% or decrease of 5%, can shorten or extend fatigue lifetime of the structural component by 30% or 20%, respectively.

oil tanker; crack propagation; finite element method

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

1-8.

2010.

objavljeno

Podaci o matičnoj publikaciji

Proceedings of the International Workshop Advanced Ship Design for Pollution Prevention

Guedes Soares, C ; Parunov, Joško

London : Delhi: Taylor & Francis

978-0-415-58477-7

Podaci o skupu

Nepoznat skup

predavanje

29.02.1904-29.02.2096

Povezanost rada

Brodogradnja, Strojarstvo