Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Structuring of polypropylene matrix in composites (CROSBI ID 162024)

Prilog u časopisu | pregledni rad (znanstveni) | međunarodna recenzija

Šmit, Ivan ; Denac, Matjaž ; Švab, Iztok ; Radonjič, Gregor ; Musil, Vojko ; Jurkin, Tanja ; Pustak, Anđela Structuring of polypropylene matrix in composites // Polimeri : časopis za plastiku i gumu, 30 (2009), 4; 183-192

Podaci o odgovornosti

Šmit, Ivan ; Denac, Matjaž ; Švab, Iztok ; Radonjič, Gregor ; Musil, Vojko ; Jurkin, Tanja ; Pustak, Anđela

engleski

Structuring of polypropylene matrix in composites

Binary isotactic polypropylene (iPP) composites with talc and wollastonite were modified with different elastomers: poly(styrene-bbutadiene- b-styrene) (SBS), poly(styrene-b-ethylene-co-propylene) (SEP), poly(styrene-b-ethylene-co-butylene-b-styrene) (SEBS), SEBS grafted with maleic anhydride (SEBS-g-MA), ethylene/propylene/ diene terpolymer (EPDM), and propylene-based metallocene (mEPR) at different content ratios and studied by different microscopic techniques (optical, SEM, TEM), wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC). Complex investigations of the structure-property relationships by comparison of ternary iPP composites with constitutive binary composites and binary blends showed that different factors affect (re)structuring of the semicrystalline polypropylene matrix during its crystallization and solidification during preparation by compression moulding. Structural investigations were focused on determination of influencing factors in crystallite and spherulite growth, phase structure of the iPP crystallites, degree of crystallinity, orientation of filler particles and iPP crystallite, structuring/spherulitization of the iPP matrix, and phase morphology of particles and polypropylene composite and constitutive blend systems. From the interplay of different factors in structuring of the iPP matrix the following influencing factors could be recognized: (i) nucleation by tiny dispersed particles of polymers and filler particles, (ii) orientation of the iPP crystallite and filler particles, (iii) migration/transferring of the iPP chains from melt islands to growing lamellae during solidification, (iv) encapsulation of dispersed/filler particles leading to core-shell morphology, (v) steric hindrance factors generated by filler and dispersed elastomer particles in the spherulitization of the iPP matrix, and (vi) possible partly co-crystallization in the iPP/propylene-based metallocene copolymer (iPP/mEPR) regions.

core-shell morphology ; crystallization ; ethylene/propylene/diene rubber ; orientation ; phase morphology ;

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

30 (4)

2009.

183-192

objavljeno

0351-1871

1846-0828

Povezanost rada

Kemija

Poveznice
Indeksiranost