Velocity of detonation measuring device calibration method (CROSBI ID 561014)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Dobrilović, Mario ; Bohanek, Vječislav ; Škrlec, Vinko ; Stanković, Siniša ; Dobrilović, Ivana
engleski
Velocity of detonation measuring device calibration method
The velocity of detonation is one of basic parameters for determination of explosive power and quality that can be measured. Delay period is of the same importance for detonators and other initiation devices. Determination of those parameters is mainly performed by optical-electrical method by time interval measurement. When there is a need to calibrate measuring devices, some difficulties occur. In Laboratory for testing of explosive material, a method was developed for the calibration of electronic timer with digital oscilloscope. Paper describes the setup and measurement conditions, type of instrumentation and accessories of comparison calibration method with review according to the measuring uncertainty and method suitability.
explosive materials testing ; calibration ; velocity of detonation
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
285-288.
2010.
objavljeno
Podaci o matičnoj publikaciji
Proceedings of 11th INTERNATIONAL CARPATIAN CONTROL CONFERENCE
K.VARGA
Miskolc: University of Miskolc
978-963-06-9289-2
Podaci o skupu
11th INTERNATIONAL CARPATIAN CONTROL CONFERENCE
predavanje
26.05.2010-28.05.2010
Eger, Mađarska