Napredna pretraga

Pregled bibliografske jedinice broj: 435894

The use of D-optimal design to model the effects of process parameters on mineralization and discoloration kinetics of Fenton type oxidation


Grčić, Ivana; Vujević, Dinko; Koprivanac, Natalija
The use of D-optimal design to model the effects of process parameters on mineralization and discoloration kinetics of Fenton type oxidation // Chemical engineering journal, 157 (2010), 2/3; 408-419 doi:10.1016/j.cej.2009.11.030 (međunarodna recenzija, članak, znanstveni)


Naslov
The use of D-optimal design to model the effects of process parameters on mineralization and discoloration kinetics of Fenton type oxidation

Autori
Grčić, Ivana ; Vujević, Dinko ; Koprivanac, Natalija

Izvornik
Chemical engineering journal (1385-8947) 157 (2010), 2/3; 408-419

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Wastewater treatment; reactive dyes; Fenton oxidation; D-optimal design

Sažetak
The aim of this experimental investigation was to study kinetics of Fenton and modified Fenton oxidation applied to miscellaneous dye solutions. Several bench scale laboratory tests for the treatment of colored wastewaters containing model pollutant compounds, reactive azo dyes C.I. Reactive Violet 2 (RV2) and C.I. Reactive Yellow 3 (RY3) were performed. In order to examine the effects of initial Fe2+ concentration, oxidant/catalyst molar ratio and oxidant type on TOC reduction and color removal, the following reactants were used ; classic Fenton’s reagent (Fe2+/H2O2) and modified Fenton’s reagent, where potassium peroxodisulfate, alone and in combination with hydrogen peroxide, was selected as oxidant. Response surface methodology (RSM), particularly D-optimal design, was used for the purpose. This research contributed in several ways ; (i) evaluation of more effective Fenton oxidant on pollutant content reduction, in terms of TOC and color removal, (ii) assessment of the optimal reactant doses, (iii) describing the RV2 kinetic behavior in applied systems and (iv) determining the apparent rate constants. Mineralization was described by pseudo-first-order kinetics with observed rate constant km = 0.0133 min-1. A kinetic model describing discoloration was composed of two first-order in-series reactions with discoloration rates ; k1 = 0.9447 min-1 and k2 = 0.0236 min-1, at optimal operating conditions and with the highest initial organic load.

Izvorni jezik
Engleski

Znanstvena područja
Kemija, Kemijsko inženjerstvo



POVEZANOST RADA


Projekt / tema
125-1253092-1981 - Obrada otpadnih voda naprednim oksidacijskim tehnologijama (Sanja Papić, )

Ustanove
Fakultet kemijskog inženjerstva i tehnologije, Zagreb

Časopis indeksira:


  • Current Contents Connect (CCC)
  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus


Citati