STUDY OF INCREMENTAL HOT TUBE BENDING (CROSBI ID 554813)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Keran, Zdenka ; Novosel, Ivica ; Math, Miljenko
engleski
STUDY OF INCREMENTAL HOT TUBE BENDING
Hot tube bending is used when bending of large diameters, range 150 to 400 mm and wall thickness in range 15 to 25 mm is needed. Processing of prescribed dimensional characteristics requires two possible bending types which are flat pattern tube bending and incremental hot bending. The best process characteristics are obtained with incremental hot bending. This process is still very new and needs further improvement. The article gives detailed description of two types of incremental hot bending. Also, graphic presentation of stresses and strains in a tube wall is given too. This graphical data are reached by numerical simulation using MSC Marc Mentat program package.
flat hot tube bending; incremental hot bending; large diameters and wall thickness
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
0093-0093.
2009.
objavljeno
Podaci o matičnoj publikaciji
Annals of DAAAM for 2009 and Proceedings of the 20th International DAAAM Symposium
Katalinić, Branko
Beč: DAAAM International Vienna
978-3-901509-70-4
1726-9679
Podaci o skupu
The 20th INTERNATIONAL DAAAM SYMPOSIUM "Intelligent Manufacturing & Automation: Theory, Practice & Education"
poster
25.11.2009-28.11.2009
Beč, Austrija