Electromagnetic gauge of tube inner radius compensated for material properties and coil radial offset (CROSBI ID 554652)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Vasić, Darko ; Perković, Silvano ; Bilas, Vedran
engleski
Electromagnetic gauge of tube inner radius compensated for material properties and coil radial offset
Low-frequency electromagnetic measurement of inner radius of metal tubes is indispensable in their production and condition assessment. Two challenges in such a measurement are corrections for variations in electromagnetic properties of a tube and coil radial offset. The authors investigate adaptation of the single-coil method for measurement of inner radius to a small scale embedded system based on a DSP microcontroller. The electromagnetic gauge can be used for both magnetic and nonmagnetic tubes and its performances are comparable to the laboratory implementation of the method based on a precision RLC meter.
impedance measurement; diameter gauge; embedded system
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
638-642.
2009.
objavljeno
Podaci o matičnoj publikaciji
XIX IMEKO World Congress Fundanmental and Applied Metrology
Girao, Pedro S.
Lisabon: International Measurement Confederation (IMEKO)
Podaci o skupu
XIX IMEKO World Congress
predavanje
06.09.2009-11.09.2009
Lisabon, Portugal