Influence of grinding productivity on the burn intensity of the ground surface (CROSBI ID 473935)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Ciglar, Damir ; Cebalo, Roko ; Udiljak, Toma
engleski
Influence of grinding productivity on the burn intensity of the ground surface
The productivity increase of the grinding process expressed by reduced material removal rate can result in incorrect grinding and the consequence is the ground surface burn and occurrence of other grinding defects on the ground surface. The paper studies the burn intensity of the ground surface and other grinding defects in different material samples, depending on the increase of grinding productivity. The ground surface burn intensity has been determined by means of the surface lightness interval, with the upper and lower value, and measurements were carried out on the Image Analysis System LECO2001. The results have shown that the increase in grinding productivity on all the ground material specimens results in an increase of burn intensity, reduction of the surface lightness interval value, and an increase in the change of surface layer hardness and the layer depth of variable workpiece hardness. Therefore, the surface lightness interval values, i.e. the burn intensity of the ground surface can determine the correctness of the grinding process and approximate limited productivity.
grinding productivity; grinding defects;grinding burn intensity;grinding surface lightness interval;burn intensity of the ground surface
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
95-105-x.
2000.
objavljeno
Podaci o matičnoj publikaciji
CIM2000
Cebalo, Roko ; Schulz, Herbert
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)
Podaci o skupu
Computer Integrated Manufacturing and High Speed Machining
predavanje
08.06.2000-09.06.2000
Korčula, Hrvatska; Lumbarda, Hrvatska